Sway Bar Bushing 8K0411327C is made from high-performance polyurethane (70–80 Shore A hardness), lasts 3–5x longer than OEM rubber, and offers superior resistance to oil, ozone, and road salt corrosion—ideal for harsh climates and long-term reliability.
Inner
Diameter：28mm
Fit to：
AUDI A8
2011-2017
AUDI Q5
2009-2018
Sway Bar Bushing 8K0411327C eliminates the “loose” feeling and clunking noise over speed bumps
True plug-and-play—no modification or trimming required
Perfect OE fit prevents premature wear of stabilizer end links and control arms
Small but mighty—sway bar bushings carry the full weight of suspension stability.
Routine maintenance prevents 80% of common failures.
Skip care, and your bushings transform from “ride stabilizers” into squeaky, clunky noise-makers.
These proven, universal tips—from quick daily checks to seasonal care—work on all cars and SUVs, especially those using precision OE-fit parts like the Sway Bar Bushing 8K0411327C.
Golden Rule: Lubrication is everything. Without it, premature wear is guaranteed.
Stop squeaks, clunks & body roll → sharper handling, safer driving
Protect stabilizer end links & your entire Stabilizer Bar Assembly → avoid expensive suspension repairs
(Replacing just the bushing: under $30 vs. $300+ for full end link assembly)On high-mileage vehicles (>50,000 miles), proper care cuts noise by 90%—ride smooth like new
Visual Inspection
Lift the vehicle. Check bushings for cracks, tears, deformation, or dry rot.
→ Rubber hardened?
→ Polyurethane dry or chalky?
= Immediate service alert.
Lubrication Upgrade
Use silicone-based grease (waterproof + heat-resistant).
→ Polyurethane bushings: Lube every 3 months
→ Rubber bushings: Lube every 6 months
❌ Never use petroleum-based grease—it destroys rubber and damages OE-style mounts.
Clean & Rust Prevention
Scrub off road salt, mud, and grime. Rinse with pH-neutral car wash soap.
Salt belt drivers: clean weekly to shield your Stabilizer Bar Assembly.
On-Road Load Test
Drive over bumps or sharp turns. Note any new noises.
Winter tip: Warm up the engine first—cold hides early wear.
Inspect Connected Parts
While under the car, check stabilizer end links, control arms, and nearby seals.
Fix oil leaks immediately—oil contact ruins bushings fast.
|
Driving Condition |
Maintenance Focus |
Frequency / Notes |
|
Summer / High Heat |
Prevent heat cracking |
Lube every 2 months with high-temp silicone grease |
|
Winter / Salt Roads |
Fight corrosion & brittleness |
Wash the undercarriage weekly. Replace brittle rubber bushings promptly. |
|
Off-Road / Heavy Loads |
Check for deformation |
Inspect every 3,000 miles. Polyurethane bushings recommended. Avoid overloading. |
|
City / Daily Commute |
Basic lube + visual check |
Monthly—pair with oil changes |
❌ "Replace but don’t maintain" → Even brand-new stabilizer bar bushings can fail prematurely.
❌ Ignoring early noise → “It’s just aging” is a myth. Squeaks = imminent wear in mounts or links.
Sway bar bushing care is like “preventive suspension health.”
Small effort, massive payoff: follow these 5 steps, and extend service life from 5 to 8+ years—for a quieter, safer, more confident drive.
Hearing a squeak? Don’t panic—try proper lubrication FIRST!
(Especially critical for precision-fit OE replacements like the Sway Bar Bushing 8K0411 327C)
This article is for reference only. For specific solutions, please consult your local automotive repair engineer.
Our Sway Bar Bushing 8K0411327C is made from high-strength polyurethane or high-temperature-resistant rubber—premium materials known for excellent wear resistance, corrosion resistance, and long-lasting durability. Engineered to deliver consistent performance in all driving conditions, it’s a top choice for suspension reliability. Every part undergoes rigorous quality testing to ensure long service life, reduce maintenance needs, and lower replacement costs over time.
